Description

Battery For Black & Decker 12V 2000Mah BL1110 BL1310 BL1510 LB12 LBX12 EGBL108 Power Tool Li-Ion Batterie Screwdriver battery

Battery compatible model Replace for:BLACK&DECKER: BL1110, BL1310, BL1510, LB12, LBX12, LBXR12Compatible With:BLACK&DECKER: BDCDMT112, EGBL108, EGBL108KB, GKC108, HPL106, HPL10IM, HPL10RS, LDX112, LDX112C, PSL12

Tool battery usage specification1 Newly purchased nickel-cadmium nickel-hydrogen or lithium batteries, after using the remaining battery, put it aside for 20 minutes, and then charge it for the first time.2 After using the tool battery, please lay it out for 15-30 minutes before recharging because the internal temperature of the battery may be relatively high after the battery is used, and it is in a protected state, and the charger will not recognize it.3 Please try not to over-discharge frequently. If you obviously feel that the speed and strength are insufficient during use (batteries with a power indicator, press the indicator at this time, if only one of the faint lights is on, you must pull Recharge in time, the best state of the battery: charge when there is still 10% 15% of the power. It is recommended to charge the battery in time to prevent irreparable damage to the battery cell due to over-discharge, which is beneficial to prolong the life of the battery. Just like a man's kidney, it must be used in a reasonable and moderate manner to better protect its performance.4 Use the charger of the special adapter model to charge. Do not reverse the battery. When putting the battery into the charger, pay attention to the correct polarity, and the positive and negative poles should be aligned.5 If the tool battery may not be used for a long time after use, it is recommended to charge the battery for 20-30 minutes (without full charge) within 2 days of use to ensure that the battery will not be stored for a long time and the voltage will not drop, causing it to be unable to be charged next time.6 During use, charging or storage, if you find that the battery becomes hot, emits odor, discoloration, deformation or other abnormal phenomena, you should stop using it. The temperature during charging should not exceed 45℃, and the temperature during discharge should not exceed 50℃. If the battery is hot, please Do not touch until it cools7 Do not burn or destroy the battery, it may cause the release of toxic gas or explosion8.Don't put the battery in unfavorable environment, such as extreme temperature, deep cycle or frequent overcharge/overdischarge9.During battery use or storage, pay attention to dust, water, fire, and static electricity, and do not put the battery in water or sea water10Do not use other metal objects to directly touch the positive and negative electrodes of the battery to avoid short-circuiting the battery.11. If the power drops when the battery is in use, please turn off the electrical switch to prevent the battery from over-discharging.12 When the battery is not in use, please remove it from the deviceAfter the battery is used, if the battery becomes hot, please cool it down in a ventilated environment before recharging it.13 If the battery cannot be charged and discharged normally, during the warranty period, please contact the seller in time to carry out the warranty14. After long-term storage, the battery should be charged and discharged every three months.15. Try to separate, squeeze, hit the battery, the battery will heat or catch fire. The lye in the battery is harmful to the skin and eyes, and it will damage the clothes.16.Keep the battery away from children, if swallowed, contact a doctor immediately