Description

Ultra-small and ultra-thin infrared human body induction switch sensor mini small size AC80-250V

Product selling point:

1. Using high-quality materials, the quality is guaranteed

2. Ultra-small and ultra-thin red man body sensor switch

3. Small size, high power

4. Adjustable time delay light sensitivity

5. Wide range of applications

parameter:

Working voltage: ultra-wide voltage AC80 to 250V

Output voltage: The output voltage after induction is the same as the input voltage

Applicable loads/appliances: All lamps (LED, fluorescent and incandescent) and appliances are suitable

On-off control: MOS tube (no sound when on and off, no static electricity, no sparks)

Maximum allowable load power: 200w (LEDs, fluorescent lamps, etc. can use 200w, with zero-crossing protection design)

Induction distance: 8 meters in diameter

Sensing angle: 120 degrees (the sensing range is a 120-degree cone)

If you want to reduce the sensing angle, you can use electrical tape to paste the range that does not need to be sensed inside the sensing lens. Internal stickers have no effect on appearance

Response time: Immediately

Delay adjustable range: 5 seconds to 8 minutes

Triggering method: continuous triggering (for example, setting a delay of 30 seconds, if there is a new induction before 29 seconds, it will continue to power off and then extend the power-on time by 30 seconds)

Adjustable range of light sensitivity: 10LUX to 2000LUX (the LUX knob is turned clockwise to the end to sense all day, and counterclockwise to the end to sense only in dimly lit environments)

Package list:

Ultra-thin infrared human body sensor switch*1

AC110-240V 360 Degree PIR Infrared Motion Sensor

Product parameters

Product function: When a person enters the induction range, the power is turned on immediately, and the power is turned off according to the set time after the person leaves. To achieve the purpose of intelligent energy-saving control. All electrical appliances such as LED lights, energy-saving lamps, fluorescent lamps, incandescent lamps, alarms, exhaust fans, etc. are suitable

1. Working voltage: AC110-240V range universal voltage and DC DC9-24V universal voltage are optional (don't worry about voltage instability)

2. Rated load current: 10A (AC voltage rated to allow control of incandescent lamps 1200W, LED, energy-saving lamps and other electrical appliances 300W, DC voltage 120W)

3. Induction distance: adjustable within 8 meters in diameter;

4. Sensing angle: 360-degree depression angle 140-degree cutting angle;

5. Delay adjustment range: 5 seconds to 10 minutes (Note: the delay refers to how long the power is turned off after the person leaves, not how long it takes to sense after the person arrives, it is all sensed immediately)

6. Power consumption: <0.05W