Arduino Based RC Transmitter Circuit Board PCB Handheld Joystick Controller Module with Bluetooth NRF24L01 MPU6050 DIY Pro Mini

The product is a blank PCB. There are no components on the this circuit board.

PCB Features:

-2 Layer PCB

-Material:FR-4,

-Copper Thickness: 1oz

-PCB Surface Finish: HASL with lead

-Colour: Black

Super quality PCB. Solder pads are corrosion resistant. Thanks to the quality lead finishing on the Pads on the PCB, the soldering process is high quality. PCB quality greatly increases the operating performance of such circuits.

Technical Details:

With this RC wireless transmitter with radio control signal command, you can control almost all your projects wirelessly with a range of up to 700 meters in open space. Radio control card RC card project contains exactly 14 channels, 6 of which are analog and 8 are digital inputs.

The brainchild of this Arduino project is an Arduino Pro Mini board, the smallest Arduino board. Radio communication is based on module NRF24L01. The transmitter has 2 joysticks, 2 potentiometers and 4 push notification buttons, as well as a motion meter and gyro module. With this project, it can be used for projects that involve a lot of control and movement, such as moving around the controller or bending over to hold and lift things. All electronic component components of the project are mounted on a single PCB thanks to a special design. After material assembly, you can make the outer joystick unit part of the RC radio control transmitter by making a cover from transparent acrylic plexigalss material in your own workshop.

This wireless remote control radio transmitter can be used with RC project to control some toys, toy cars, drones, etc. You can use it to control many projects that need direction and movement with wireless remote control technology.

The wireless controller can also be used as a commercial RC transmitter that needs radio control based support.

It has a built-in measurement unit consisting of two joystick joysticks, two potentiometers, two toggle switches, six buttons, as well as an accelerometer and a gyroscope, which can be used to control objects by moving or tilting around the controller.

You can use this transmitter circuit together with the receiver circuit available in our store.

Please visit to view and purchase the RC radio receiver PCB.

Arduino RC Transmitter Circuit Diagram

Note that Arduino pro mini has 5V, 3.3V versions. The pin out changes according to the versions of Arduino pro mini. Please pay attention to the pin out for the Arduino pro mini board that you will use for this circuit board.

You can find the BOM List, the installation of the circuit and all the technical details in the video.

Video:

youtube.com/watch?v=-BDCmwNssiw