COOLMOON AOSOR Flexible Light Bar PC Backlight Flexible Lamp Strip 5V ARGB Aura Sync Flexible LED Light Bendable DIY for Chassis Feature:1. High-quality high-density lamp beads: The lamp board is built with 44pcs/56pcs high-quality high-brightness lamp beads in double rows, which makes the lamp board bright and full of color, which is pleasing to the eye. The light effect does not reveal the lamp beads, and the high brightness has no dark spots. 2. Bendable & flexible/cool luminous stripes with a sense of technology: High-quality silicone material, with strong light guide, soft texture, flexible and durable, can be bent 360°, to meet DIY modeling requirements. Cool multi-stripe light-emitting design, the light is soft, full and translucent, showing multi-track flowing light effect, more technological sense. 3. Free DIY for multiple application scenarios: AL300/AL200 flexible light board can be used to decorate 24Pin motherboard power supply lines, 8pin graphics power supply lines and other hardware equipment power supply lines, can be straightened as a light board, and can also be used as a chassis light bar. 4. 5V ARGB Aura Sync: Support the second generation addressable ARGB interface of motherboards such as for ASUS / MSI / Gigabyte / ASRock, etc., control the lighting through software, and programmatically customize 16.8 million colors. 5. Multi-interface expansion is more convenient: 5V 3PIN*2+4PIN, lengthened wire makes wiring more worry-free, simple white is the current mainstream color, multi-interface makes connection and installation and expansion more convenient, and greatly improves product compatibility; lengthened wire , to support the backline. It comes with instructions and installation accessories, which can be fixed with cable ties or double-sided tape, making installation and use easier. Built-in binding tape, without extension cable, directly tied to graphics card cable/motherboard cable, widely used. Specification:Certification: CE Origin: Mainland China Type: Sync Motherboard Cable Model Number: Flexible Strip Light Package: Yes Brand: COOLMOON AOSOR Model: AL300,AL200 Material: Silicone Lamp beads: 44pcs(AL300)，56pcs(AL200) Voltage: 5V DC Current: ≤0.7A±10% Power: ≤3.5W±10% Interface: 5V 3PIN*2+4PIN (5V 3-pin female plug into the motherboard 5V ARGB Aura Sync interface, 5V 3-pin male connect with other 5 V ARGB products in series to light up the light; insulation protection cap - pin interface is not used, Cover the cap to prevent short circuit; small 4PIN interface - dedicated interface for COOLMOON brand controller (when the motherboard does not support 5V ARGB, you can purchase the Coolmoon controller to use with it) Wire length: 600+10%mm Light board: 300x41x12mm/11.81x1.61x0.47in(AL300)， 200x59x12mm/7.87x2.32x0.47in(AL200)Total weight: 0.23kg (including packaging) Installation method: (1): Tie fixing The AL300/AL200 flexible light board can be installed on the graphics card and the power supply line of the motherboard by fixing it with a tie. Installation method: A. Insert the cable tie from a hole on the back of the transparent buckle, B. Pass the cable tie through another hole, fasten the cable tie to the graphics card and the power supply cable of the motherboard, then tighten the cable tie and cut it off Just the excess (2): Double-sided tape fixed By fixing with double-sided tape, the AL300/AL200 flexible light board can be pasted on the free plane of the chassis for use. Installation method: A. Paste the double-sided tape on the transparent buckle, B. Tear off the protective film on the surface of the double-sided tape, and then paste and fix the AL300/AL200 soft light board to a suitable position on the chassis. Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.

1 X Light Board 4 X Double Sided Tapes 1 X Instruction 3 X Transparent Snaps 4 X Cable Ties