Description
DC 12 -60V 10A 600W PWM Motor Speed Controller Digital Tube LED Display Module Adjustable Switch Motor Controller Speed Control
Specification:
Operating Voltage: DC 12 -60V
Output Voltage: According to the input voltage
Control Power: 0.01-600W
Rated Current: 8A
Maximum current: 10A
Quiescent current: 0.03A (standby)
Frequency: 14KHz
Pulse width adjustment [duty cycle value] range: 0-100% (red digital tube display)
Note: No potentiometer, only buttons to adjust motor speed.
K1, K2 are the buttons for changing the output duty of the motor controller. K1 is increased, K2 is decreased, and the output duty value is displayed on the digital tube. The larger the input duty value, the faster the motor speed.
K3 is the key to the product. Press and hold the K3 button to turn it on or off.
1. The input voltage of motor is DC voltage, and it can't be directly connected to AC (for example: household 220V AC), otherwise it will be burnt out!
2. Do not reverse the positive and negative terminals of the DC power supply, otherwise the motor controller may be damaged.
3. The motor can be positive or negative. The direction can be changed by adjusting the line sequence when the running direction is inconsistent with the expectation.
4. Adjust the button with the arrow pointing to change the duty cycle of the motor controller. The route must not touch the heat sink when the motor speed changes the wiring.
5. Click the button by 'Up', the value is increased, click the button by 'Down', the value is decreased, the middle button is Turn On/Off switch.
