DC 12V AC 110V 220V Digital Time Delay Relay Dual LED Display Cycle Timer Control Switch Adjustable 0-999 Hours Adjustable Power

Category : Electronic Components & Supplies | Active Components

USD 3.05USD 3.63

DC 12V AC 110V 220V Digital Time Delay Relay Dual LED Display Cycle Timer Control Switch Adjustable 0-999 Hours Adjustable Power

Description
Specification

Description

DC 12V

Description:

Time range: 0-999 minutes 0-999 0-999 seconds three can choose the desired

Size: display panel: 79mm * 43 installation: 71mm * 40mm24mm

Feature set: a combination of 18 features

Relay: original 20A relay, power <1800W

System power: 12v

user's manual

Before using the first prompt, the user notices that after a set of data waits for 6 seconds, the memory module automatically saves the data set after 6 seconds.

(1) Press the SET button to enter the time setting mode, the digital tube flashes, the button plus or minus button adjusts the time T1 and the time T2. After setting the time, it must wait for 5s, after 5s, the module will automatically remember to save the data.

(2) Press SET, parameter setting mode. There are two sets of parameters for the user to select P0, P1. Press SET in the current mode to switch P0, P1. In P0, the P1 parameter can be set to its own timer mode by key addition and subtraction.

P0--0: The timing mode is 0--999? second

P0--1: Timing mode is 0--999 minutes

P0--2: Timing when the mode is 0--999

P1--0: T1 time delay relay (T1 timer)

P1--1: T1 delay time relay release (T1 timer)

P1--2: Delay relay after T1 (T1 timer), then the relay release (T2 timing) ends after delay time T2.

P1--3: T1 delay time relay release (T1 timer), then delay time T2 relay energization (T2 timing) ends.

P1--4: After T1 delay relay (T1 timer), then the relay is released after the delay time T2 (T2 timer), repeat the cycle.

P1--5: The T1 delay relay is released (T1 timer), then the T2 relay is energized (T2 timer) and the cycle is repeated.

AC 110V 220V

Specifications: Model: Time Delay Relay Timing range: 0-999s,0-999m,0-999h Power supply voltage: AC 110V-220V LED Display: Red + Blue Dual Display Size: 79 x 26 x 43mm Hole size: 72 x 40mm Instructions: 1.After setting the data, you must wait 6 seconds,6s post modules automatically save memory set data. 2.Press SET key once to enter the time setting mode,the red LED flashes, press the key to increase or decrease the setting time T1. 3.After setting time T1,short press the SET key again, the green LED flashes,and the time is set by pressing the key Time T2, T2 time setting is completed,press SET key again, the system will automatically save the memory setting time or wait for 6s, 6s module will automatically save the data memory. 4.Long press SET,enter parameter setting mode.There are two sets of parameters for the user to select P0, P1.Short press SET in the current mode to switch between P0 and P1. 5.In P0 parameter can be set by pressing the key to adjust their own timing mode.In the P1 parameter can be set by adding and subtracting keys work mode. P0--0:T1 Timing mode is second. P0-1: T1 timing mode is minutes. P0--2:T1 Timing Time mode is hour. P1--0:Delay T1 time,relay pull(T1 timer) P1--1:Relay release after T1 time delay (T1 timer) P1--2:Delay T1 time,relay pull(T1 timer),and then relay release after T2 time delay(T2 timing),then it is finished. P1--3:Relay release after T1 time delay(T1 timer),then delay T2 time,relay pull(T2 timing),then it is finished. P1--4:Delay T1 time,relay pull(T1 timer),and then relay release after T2 time delay(T2 timer),cycling. P1--5: Relay release after T1 time delay(T1 timer),then delay T2 time,relay pull(T2 timer),cycling.