DC12V DC24V 2CH Remote Control Light Switch Relay Output Radio Receiver Module and Belt buckle Transmitter / window/Garage Doors
Application range:
High confidentiality, large storage , stable performance and dispensing with traditional jumpers or switches coding, just wireless remote control will be fired the receiving signal controller, make this controller receive and store the signal from remote control.
Apply in many kinds of wireless devices – including hand-held and portable units, window/door transmitters and a variety of detectors and other devices.
Commonly used to control those wireless products in family, office, hotel, hospital, shopping malls, warehouse etc.
Specifications:
Operating Voltage: DC12V/24V
Operating Current: 6Ma
Operating Frequency: 315,433 MHz
Operating Temperature: -40C ~ +80C
Receiver Sensitivity: -105dBm
Output Voltage: DC
Output Current: 10A
Code :Learning code .(jog/Non-Latched .inter-lock/Latched .self-lock /Self-Latched )
Output working way:
Self-locking: Connect the jumper 1 with the cutting out cap. ( Self-locking control mode
:Press the switch is on the load, press the same switch again is to disconnect the load
.Need one channel switch and a one-button remote controller.)
Jog---The cutting out cap is not occupied, jumper 1 and jumper 2 do not connect either.
Press the switch is on the load ,loosen is to disconnect the load. Also need one channel
switch and a one-button remote controller.)
Inter-lock------- Connect the jumper 2 with the cutting out cap (Press one switch is on the
load , press another switch is to disconnect the load . (Need one channel switch and 2-
button remote controller.)
2 Channel is self-locking and 2 channel is jog ,connect the jumper 1 and jumper 2 with the
cutting out cap .)
working ways :self-lock , jog or self-lock and jog together.
Learning method:
press the learning button 1 time ,the LED indicator flash then press the transmitter button A , until the LED indicator stop ,it mean button A learning successfully
press the learning button 2 times ,the LED indicator flash then press the transmitter button B , until the LED indicator stop ,it mean button B learning successfully
press the learning button 3 times ,the LED indicator flash then press the transmitter button C, until the LED indicator stop ,it mean button C learning successfully
Remove Code:
Keeping press the learning button 8 second , until the LED indicator stop ,it mean remove code successfully
Note: 433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency
pacote inclued:
A:
1 x Receiver(with cover)
Brand Name : xuanlongyuan
Frequency : 315MHz/433MHZ
Package : No
working voltage : DC12V/24V
Wireless Communication : RF
channel : 2CH
Use : Universal
Model Number : XLYD-456
working frequency : 315MHz/433MHZ
Channel : 2
receiver sensitivity : -105 dBm
Coding type : Learning code
PCB size : 68*48*16.8mm