DIEWU TXA026 PCI Express 1x Gigabit Fiber Network Lan Card with Single SFP Port 10/100/1000Mbps Ethernet Controller for Desktop

Chipset Description:

The Ethernet Controller I210 (I210) is a single port, compact, low power component that

supports GbE designs. The I210 offers a fully-integrated GbE Media Access Control (MAC), Physical

Layer (PHY) port and a SGMII/SerDes port that can be connected to an external PHY. The I210

supports PCI Express* [PCIe v2.1 (2.5GT/s)].

The I210 enables 1000BASE-T implementations using an integrated PHY. It can be used for server

system configurations such as rack mounted or pedestal servers, in an add-on NIC or LAN on

Motherboard (LOM) design. Another possible system configuration is for blade servers as a LOM or

mezzanine card. It can also be used in embedded applications such as switch add-on cards and network

appliances

Features:

• Small package: 9 x 9 mm

• PCIe v2.1 (2.5 GT/s) x1, with Switching Voltage Regulator (iSVR)

• Integrated Non-Volatile Memory (iNVM)

• Three single port SKUs: SerDes, Copper, Copper IT

• Value Part (Ethernet Controller I211)

• Platform Power Efficiency

— IEEE 802.3az Energy Efficient Ethernet (EEE)

— Proxy: ECMA-393 and Windows* logo for proxy offload

• Advanced Features:

— Audio-video bridging

• IEEE 1588/802.1AS precision time synchronization

• IEEE 802.1Qav traffic shaper (with software extensions)

— Jumbo frames

— Interrupt moderation, VLAN support, IP checksum offload

— PCIe OBFF (Optimized Buffer Flush/Fill) for improved system power management

— Four transmit and four receive queues

— RSS and MSI-X to lower CPU utilization in multi-core systems

— Advanced cable diagnostics, auto MDI-X

— ECC – error correcting memory in packet buffers

— Four Software Definable Pins (SDPs)

• Manageability:

— NC-SI for greater bandwidth pass through

— SMBus low-speed serial bus to pass network traffic

— Flexible firmware architecture with secure Flash update

— MCTP over SMBus/PCIe

— OS2BMC/CEM (optionally enabled via external Flash)

— PXE and iSCSI boot