Our gum barrier resin is a very soft silicone and comfortable gum.If it's a bad gel it can be very hard and not easy to take off, and sometimes it can hurt your gums when you take it off

=========================

[warning]

1. For professionals only.2. Read instructions, warnings and chemical safety technical instructions carefully before starting treatment. Follow instructions strictly.3. Photocured gum barrier resin barriers should not be used in patients with known resin, especially isobutenate-infected patients. If dermatitis, eczema, or other allergic reactions occur, rinse the area with plenty of water and refer the patient to a doctor.4. The material shall not be used for injection.5. The product must be stored in a cool and dark place.6. Please check whether the liquid flows smoothly on the inert material surface (such as mixed pad) before using in the oral cavity. If you feel resistance, do not continue operation. Replace the needle with a new one and retest it before use.7. Ensure gum and oral health before using this product.8. If foam occurs repeatedly where light cured gum barrier resin has been applied, wash off the gel and check for leaks. Gently dry the area and re-touch the light cured gum barrier resin. If the problem persists, remove the barrier and reapply.9. Handle needles and syringes properly.10. In the protection of the full arch, the photocured resin fence is scanned for 20 seconds in standard mode and the lens is kept about 1 cm away from the fence and tissue. To protect tissue adjacent to fewer teeth, scan the fence for about 3 to 5 seconds per tooth. Examine the resin carefully with a dental instrument to make sure it has cured completely.