Specification for Charger LII-S8
I. Warning:
1. This charger can only charge cylindrical lithium ion battery (Li-Ion-3.70V /3.80V), lithium iron phosphate battery (LifePO4-3.20V), and ni-MH/NICd-1.20V; And the square 9V ni-MH-9V rechargeable battery;
2. Before use, please carefully refer to the manual, pay attention to the recommended charging current of the rechargeable battery, do not exceed the recommended charging current;
3. Choose to use the 12.0V DC adapter, and the supply current shall not be less than 4.0A (ampere);
4. The charger may get hot when charging, please put it out of the reach of children to charge;
5. When it stops using, please unplug the power and remove the battery;
6. It can only be used at room temperature.
7. The test data of this product is for reference only, please refer to professional instruments for the actual situation.
Ii. Charger Specifications and Functions:
1. Dc12.0v 4.0A(minimum) input, intelligent charging and microcomputer management system for each tank;
2. The biggest highlight of this charger is that it can charge rapidly with multiple channels of 2 amps at the same time and 9V nickel metal hydride charging battery;
3. Charging current has five grades 0.30A/0.50A /0.70A /1.00A/2.00A;
4. Charging current:
4.1 lithium-ion batteries (3.70 V / 3.80 V) and lithium iron phosphate batteries (3.20 V) on electricity, according to buy battery internal resistance by detecting system automatic configuration CURRENT size, if you want to change the charging electric CURRENT size can be long press CURRENT, first to flash show short when CURRENT value according to the CURRENT key, you can select charging CURRENT (A/A / 0.50 0.30 0.70 2.00 1.00 A/A/A) (note: in the first 1/3/6/8 slot maximum charging CURRENT is 2.0 A, 1.0 A maximum in the first 2/4/5/7 slots). The charging current between the first and second slots, the third and fourth slots, the fifth and sixth slots, and the seventh and eighth slots will not exceed 2A in total, that is, when one slot is charged with 2A current, and then put the battery into the other slot, the 2A current will fall back to 1A current charging;
4.2Ni-MH/Ni-Cd battery (1.20V) charging current is fixed at 0.50A, and current cannot be selected;
4.3 The nickel metal hydride (9.0V) rechargeable battery can be charged in a specific place, and two batteries can be charged at the same time. The charging current of each battery is about 85mA;
5. When charging, the LCD can display the battery symbol/CH and the groove groove tao battery type/charging current A/V battery voltage, charging time h/charging capacity mAh and percentage % / battery internal resistance m Ω data; When the battery is full, the data on the LCD will be saved and displayed at 100%. The battery symbol will not move when the battery is full. Each slot pair should have red and green indicator LED lights. The red light will be on when charging, the green light will be on when standby and stop charging, and the red light will flash warning when the battery or slot channel is abnormal (short circuit/reverse connection, etc.);
6. The system can automatically identify lithium battery 3.70V and nickel metal hydride/nickel cadmium (1.20V) batteries. Press MODE button to manually select lithium iron phosphate battery 3.20V and lithium iron 3.80V batteries (IMR).
7. With activation function of 0V voltage, 1.65-2.20V cannot be charged (but there will be activation current trickling charging);
8. It has multiple safety protection functions, such as overcharge, overdischarge, short circuit, reverse connection, etc. At the same time, it can automatically identify the bad battery intelligently;
9. Charging mode: constant current and constant voltage.
Iii. Button and Display:
1. The key:
1.1 Button MODE (charging MODE) : This button is the battery type selection key; Click MODE to select the types of rechargeable batteries (Li-Ion-3.70V, Li-Ion-3.80V and LifePO4-3.20V), but other types cannot be selected when ni-MH/NICd-1.20V are charged. During charging, long press the MODE key to re-select the type of rechargeable battery, but the previous charging data will not be saved.
1.2 Press NEXT (NEXT channel) : This button is 1 to 8 channel query key. Click this key once to display charging data from low channel to high channel (CH1CH8 direction); Long press this button to make the display screen in the state of constant light, long press again to remove the constant light;
1.3 PREV (previous channel) : This button is the 8 to 1 channel query key. Once clicked, the channel displays charging data from high channel to low channel (CH8CH1 direction); Long press this button to make the display screen in the state of constant light, long press again to remove the constant light;
1.4 CURRENT (CURRENT adjustment) : This button is the charging CURRENT selection button; The system will automatically configure the current according to the internal resistance of the battery. To change the charging CURRENT of a channel, click NEXT or PREV to display the channel, and then press CURRENT for a long time. When the CURRENT value is flashed, press CURRENT for a short time to change the charging CURRENT of the channel. To make the charging CURRENT of all the battery channels the same, long press CURRENT first and then short press to adjust the CURRENT when the battery type is still flashing. At this time, the CURRENT value of all the channels is the same.
2. LCD display and indicator light:
2.1 After the charger is connected to the power supply, the LCD display will display null for about 3 seconds. Meanwhile, the indicator light corresponding to the channel will first turn red, then turn green and then turn off. When null is displayed, the green light will always turn on; Standby; 9V charging channel indicator light is always on green for charging;
2.2 when testing A battery, LCD will display A battery symbol/CH and the groove groove tao cell types (Li - ion - 3.70 V, the Li - ion -, LiFePO4-3.20 V, 3.80 V Ni MH/Nicd - 1.20 - V)/charging current A/V battery voltage, charging time mAh and h/volume percentage % / battery internal resistance m Ω data, such as the selected type of rechargeable battery (for example, 3.20 V / 3.80 V or default) and charging current after stop operation, the battery type 7 flashes, about 9 seconds after formally to the battery to charge, At this time, the battery symbol cycle ladder rises, indicating that the charging is going on, and the corresponding channel indicator lights up red;
During charging, you can click NEXT or PREV to query the battery parameters of each slot. When the LCD is in the dark screen, click any key will light up the screen; Among them, long press NEXT or PREV key can make the LCD in the normal state; When the battery symbol is fully charged, it will be displayed at 100%. The charging parameters will be saved and the indicator light will always turn green.
2.3 When abnormal conditions (short circuit/reverse connection, etc.) are detected in the battery or channel, the screen will display CH, Err, all battery symbols and the battery symbol of the corresponding channel will flash full grid, and the corresponding indicator light will flash red for warning. When the 9V charging channel detects abnormal battery or channel (short circuit/reverse connection, etc.), there will be no change in the screen display, but the red light will always be on at the same time.
*LCD display reference figure:
Iv. Electrical technical Parameters:
1. Input power supply: DC 12.0V 4.0A
2. Output voltage: DC 4.20V for Li-ion
4.35 V DC for IMR
3.65 V DC for LiFePO4
1.48 V DC for the NiMH/Ni - CD
9.0 V DC for the NiMH
3. Output current:
Li-ion/IMR/LiFePO4:2.00A*4(1/3/6/8 channel only), 0.30A /0.50A/0.70A/1.00A*8
The NiMH/Nicd: 0.50 A * 8
NiMH-9V: 85mA*2
4. Constant current/constant voltage charging, cut-off current: 100mA;
5. No-load standby current: <50mA;
V. Types and models of compatible batteries
Li-ion/IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440
NiMH/Cd: AA, AAA, SC/C
Vi. Charger Size:
195.0mm× 142.5mm×35.0mm(Length/width/height)
Weight: G (excluding data cable)
Lii-S1 Main Features:
Technology once again innovation, Auto-polarity detection. Do not need to distinguish the battery polarity. As long as the battery is rechargeable battery that can be charged. Do not worry about battery polarity reverse.Good Charger.
In addition to Auto-polarity detection there is a strong visible digi-dispaly. Visually beautiful. Function continues the Lii-100, very good.
Specifications
Input: Micro USB DC 5V / 1A (min.)
Output voltage: DC 4.2V 500mA / 1000mA for Li-Ion
DC 4.35V 500mA / 1000mA for IMR
DC 3.65V 500mA / 1000mA for LeFePO4
DC 1.48V 500mA / 1000mA for NiMH / NI-Cd
Constant voltage charging with cut-off current less then 100mA
Standby current: No more than 15mA
Compatible for Batteries:
Li-ion / IMR / LiFePO4: 26650, 18650, 18490, 17700, 17500, 16340 (RCR123), 14500, 10440
Ni-MH / Cd: AA, AAA, A, SC, C size
Size (mm) / Weight (grams):
Length 112mm x Width 37mm x Height 32mm
45 grams (charger) + 17grams (USB cable) included in delivery
Features:
1, One-slot charging and management system, Micro USB DC 5V input port
2, Battery polarity auto-detection (Any Polarity)
3, 500mAh / 1000mAh charging current for selection
4, Built-in digital tube indicator shows the real-time charging status of voltage and current
5, Identify Li-ion and Ni-MH battery automatically
Select manually by short-press the mode button for IMR battery (3.85V Li-ion) and LiFePO4 battery (3.2V)
6, Activation function for 0V battery of PCM protection.
7, Can not charge battery with 0.0 ≦ U <0.2V for NiMH / Cd and 1.6 ≦ U <2.2V for Li-Ion
8, Over-charging and over-discharge protection
9, Identify broken / defective battery
10, Charging under constant voltage and current
Operation instruction:
There's a 'MODE' button for choosing the battery types and charging current
Long press the 'MODE' button for 3 seconds to change the charging current, you can change the charging current at any time
Short press the 'MODE' button to change the charging types of lithium batteries. If no setting, it will default as 1.2V Ni-MH or 3.7V li-ion battery automatically. You need to change the mode for 3.85V li-ion and 3.2V LiFePO4 battery
It begins to charge the battery 5 seconds after your settings
When the battery is inserted or defective battery is inserted, the charger will have no any response showing "null" ; When the battery is fully charged, it shows "Full"
It can display the battery voltage and charge current by short press the 'MODE' button at any time during charging
Lii-S2 Main Features:
First, the warning:
1 This charger can only be filled with cylindrical lithium ion battery (3.70V/3.85V), nickel hydrogen/nickel cadmium (1.2V), lithium iron phosphate battery (3.20V);
2. Please refer to the manual carefully before use, pay attention to the rechargeable battery
Recommended charging current, do not exceed the recommended current charging;
3. Choose to use 5V DC adapter, the output current needs to be no less than 2A
(Ampere);
4. The charger may be hot when charging, be careful not to burn; please set
Charging in places where children cannot reach;
5. When you stop using it, please unplug the power supply and remove the battery; 6. It can only be used indoors at room temperature;
7. The test data of this product is for reference only. For the actual situation, please refer to the special Industry equipment.
Second, the charger specifications and functions:
1. Adopt DC5.0V2A (nominal) input, two slots for independent charging and micro
Computer management system;
2. The biggest highlight of this charger is that it can charge the battery without polarity.
Electricity!
3. The charging current has three files of 0.5A/10A/2.0A. The default is 0.5A charging. You can press the corresponding button to select the charging current.
4. When charging, the LCD can display the channel CH and the charging current, voltage, time, capacity and battery type of the channel Li-Fe3.20V/Li-ion3.70V /Li-ion3.85V (IMR);
The charging current of the slot does not exceed 2A in total, that is, when one of the slots is
2A current charging, and then put the battery in another slot, the front 2A current will fall back to 1A current charging; when the battery is full, LCD
Will display FULL;
5. It can automatically identify lithium battery (Li-lon 3.70V) battery and nickel-hydrogen (Ni-MH) battery, manually select lithium iron phosphate battery (3.20V) and Li-lon 3. 80V battery (1MR);
6. There is 0V voltage activation function, 1.65-2.20V can not be charged (but there will be active current turbulence type charging).
7. There are multiple security protection functions such as overcharge, over discharge, short circuit, etc., and can automatically and automatically identify bad batteries; 8. Charging mode: constant current and constant voltage.
Third, the button and display:
Mode (Mode): 2 buttons Each button controls a slot, within 5 seconds after power-on into the battery, click the Mode of the corresponding slot
The button can select the type of rechargeable battery. Press and hold the Mode button to select the charging current. When the battery type (such as 3.20V13.80V) and charging current are selected, stop the operation and enter the charging state after 5 seconds. During the charging process, Click the button to query the battery capacity / charging time / battery voltage;
2. LCD: After the charger is connected to the power supply, the LCD display is fully displayed.
2 seconds, then display null. When detecting the battery, the LCD displays the corresponding slot number, battery voltage and current, and the battery type symbol flashes (NiMH cadmium 1.2V no battery type symbol flashes), and enters the default recognition after 5 seconds. Charging the battery, the charging shows “V” symbol flashing indicating charging is in progress, charging
FULL is displayed when finished; *LCD display reference picture is as follows:
Fourth, electrical technical parameters:
1, input power: DC5.0V2A
2. Output voltage: DC 4.20V for Li-lon
DC 4.35V for IMR
DC 3.65V for LiFePO4
DC 1.50V for NiMH/NI-Cd
3. Output current (optional): Li-lon/IMR/LiFePO4:
2000mA*1 (only one) /1000mA*2/500mA*2
NiMH/NiCd: 500mA4, constant current / constant voltage charging, off current: <100mA; 5, no-load standby current: <15m A;
Five, compatible battery types and models
Li-ion/ IMR/LiFePO4: 26650, 21 700, 20700, 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440NiMH/Cd: AA, AAA, SC, C
Sixth, charger size:
118mm* 63mm* 30mm (length/width/height) Weight: 84g (without data cable)
Lii-S6 6-Slot Auto-Polarity Detect Charger
* Auto-Polarity Detect.
*12V/3A input with a total power of 36W.
*6 slots work independently. It can be charged together with a variety of battery mixes.
*Can accommodate 32700, 26650, 21700, 20700, Ni-MH SC and other large batteries
*A variety of protection, charging safe.
Parameters
Input:DC 12V/3A(min) Output:DC 4.20V 2000mA*3; 1000mA*6; 700mA*6; 500mA*6
DC 4.35V 2000mA*3; 1000mA*6; 700mA*6; 500mA*6
DC 3.65V 2000mA*3; 1000mA*6; 700mA*6; 500mA*6
DC 1.48V 500mA*6 Compatible for all rechargeable batteries;
Ni-MH/Cd: AA,AAA,A,SC,C size Li-ion/IMR/LiFePO4:
26650,20700,18650,18490, 17700,17500,16340(RCR123),14500,10440
