Dental LED Curing Light Wireless 1 Second Cure Lamp

Particulars1.Product Name: LED Curing Light2.Intended user: Dentist3.Intended use site: Hospital or professional medical site4.Light source: High-power blue light LED5.Wave length: 385nm to 515nm6.Light intensity: 800m W/cm2 -2500mW/cm2±10%7.Depth of solidification：≥2mm8.Power source: Rechargeable Lithium battery, 3.7V/ 2200mAh9.Charger: Power Input: 100V to 240V.50HZ/60Hz Input Power: 10VA Power Output: DC5V/1AOperation• The device is not provided sterile and is not intended to be sterilized when used. * Press the S button, following four modes are available: Normal Mode: screen show P1. Press the S button to select of time which could be 5, 10, 15, 20 seconds.• Pulse Mode: screen show P2. Press the S button to select of time which could be 5, 10, 15, 20 seconds.• Strong Mode: screen shows P3. Press the S button to select of time which could be 1. 3, 5 seconds.• During the operation, aim the top of the main unit, at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound. The curing light radiates blue light and starts working according to the set modes mean while. It starts counting down and will produce "Bi", it stops working when counting down to 0, end of work, the digital display returns to the set work mode.• During operation, the blue light can be stopped by press the power button at any time.* After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times.• Low power detective circuit is fixed inside of the main unit when low power is detected, the display screen of main unit will wink, please charge in time.• This equipment will turn off automatically if there is no any action within 2 minutes; You can turn it on by press any button.• The depth of solidification of composite is no less than 4mm per 10 second.Packing list:1.The host*12.Disposable protective sleeve *100pcs3.Charger*14.Wireless charging base*15.Shade plate*16.The instructions*1