Description
Kebidu 3V 5V 12V 433Mhz Wireless RF Switch Relay Receiver Module For Car Motorcycle LED Light Controller
Specification:
Product name : LED wireless control module
Product model : AK-LED-09A
Working voltage : DC12V
Wireless frequency: 433Mhz
Remote control distance : According to different remote controllers, the linear distance is 30-80 meters
Signal sensitivity : -110DBM
Special instructions :
Jog / self-locking is recommended with 1-button remote control
interlocking is recommended with 2 or 3-button remote control
Benefits of relay output: provide isolated contact switches, can control the on and off of signal lines, mechanical push button switch modification, etc. Can also control 3V-12V power on and off.
Connect the positive and negative poles of the 12V power supply to the V + / NV- poles, and output from P + / P- to the load
This controller is an active output, that is, the output voltage is equal to the input voltage. Zh
1.Jog / self-locking
This function is suitable for one-button remote control
Jog: After the code is successfully matched, press and hold the button, the controller will turn on, and release the button, the controller will turn off.
Self-locking: After the code is successfully matched, press the button without loosening the controller to turn on, and release the button to turn the controller off.
2.Interlock mode
This function is suitable for use with three or two button remote control
Interlocking: After the code is successfully pressed, press the A button on the remote controller to power on the controller, and then press the B button on the remote controller to turn off the controller. If it is a three-button remote controller, press C on the controller to power off
Jog code:
Press the code button on the control panel once, and the LED indicator flashes once. After the LED indicator lights up, press the remote control button that needs to be coded. The LED indicator on the control board flashes 3 times in succession.
Self-locking code pairing:
Press the code button on the control panel twice in succession, and the LED indicator flashes twice. After the LED indicator lights up, press the remote control button that needs to be coded. The LED indicator on the control board blinks 3 times in succession.
Interlocking code:
Press the code button on the control panel 3 times in succession, and the LED indicator flashes 3 times. After the LED indicator lights up, press the remote control button that needs to be coded. The LED indicator on the control board flashes 3 times in succession.
Five seconds delay learning method:
Press the code button on the control board 4 times in succession, the LED indicator flashes 4 times. After the LED indicator lights up, press the remote control button that needs to be coded. The LED indicator on the control board blinks 3 times in succession.
Ten seconds delay learning method:
Press the code button on the control panel 5 times in succession, and the LED indicator flashes 5 times. After the LED indicator lights up, press the remote control button that needs to be coded. The LED indicator on the control board flashes 3 times in succession.
Fifteen seconds to learn:
Press the code button on the control panel 6 times in succession, the LED indicator flashes 6 times. After the LED indicator lights up, press the remote control button that needs to be coded. The LED indicator on the control board flashes 3 times in succession.
