Name: MAX7219 8-Digit Led Digital Tube Display Control Module For Arduino 3.3V 5V Microcontroller Serial Driver 7 Segment - en.fumwejc.id
Brand: Your Cee
SKU: 32919207145
Price: 1.02 USD
Availability: InStock

MAX7219 8-Digit Led Digital Tube Display Control Module For Arduino 3.3V 5V Microcontroller Serial Driver 7 Segment

Category : Electronic Components & Supplies | Active Components

USD 1.02USD 1.15

MAX7219 8-Digit Led Digital Tube Display Control Module For Arduino 3.3V 5V Microcontroller Serial Driver 7 Segment

Description
Specification

Description

Product Introduction

The MAX7219 is an integrated serial input/output common-cathode display driver that connects a microprocessor to an 8-bit digital 7-segment LED display. It can also be connected to a bar graph display or 64 separate LEDs. It includes an on-chip B-type BCD encoder, multi-channel scan loop, segment word driver, and an 8*8 static RAM to store each data. Only one external register is used to set the segment current of each LED.

A convenient four-wire serial interface can be connected to all common microprocessors. Each data can be addressed without any need to overwrite all displays when updating. The MAX7219 also allows the user to choose to encode or not encode each data.
The entire device includes a 150μA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display 1-8 bits of data, and a detection mode that allows all LEDs to illuminate.

Only need 3 IO ports to drive 8 digital tubes, and the digital tube is 0.36 inch 4-bit integrated cathode digital tube.
This module is compatible with 5V/3.3V MCU (51/AVR/STM32)

Wiring Instructions

VCC→5V

GND→GND

DIN→P00

CS → P01

CLK→P02

Precautions

Do not reverse the VCC and GND to avoid burning the chip.
51 MCU P0 port needs to be connected with pull-up resistor, if your MCU does not have pull-up resistor, you can connect the data line to other ports.

MAX7219 8-Digit Led Digital Tube Display Control Module (5)