Description

Features: This product covers application ranging from simple domestic remote control to autonomous control Extremely easy to set up and use It's applied to the annunciator of family, car, motorcycle etc. These remote controls are designed to control a wide variety of electronic devices with a wireless signal.

1.Working Voltage: DC12V±10% 2.Current:Standby less than 10mA,Working less than 128mA 3.Working Temperature: -10'C—+60'C 4.Receiver Frequency: 315MHz/433MHZ 5.Receiving Sensitivity: -105dB 6.Output State: Switching Value 7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A 8.Receiver Board Size:70*50*18mm 9.Case Size:75 * 55 * 30mm Encoding Type: Learning Code Add transmitter by the Learning Button on the receiver Output State: It is adjusted by the Jumper on the Receiver Board,

Application range: Auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc. The switch can compatible 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone need of choosing the wireless remote control as they like to work with it . It is a learning code wireless remote control switch (receiver),the output way /working way can be change as you like ,it is easy to match the transmitter . The 4 channel wireless remote control switch with 4 Relays. It can make the equipment turn or reverse .on/off and so on come true. The volume is small and the performance is stable and reliable ,high receive sensitivity.

Output working way: 1. Self-lock ---connect the JP1 with the cutting out cap. 2. Jog---the cutting-out cap is non-occupation , JP1 and JP2 do not connect either. 3.inter-lock-/Latched --- Connect the Jp2 with the Cutting out cap, 4. 2 Channel is self-lock and 2 channel is Jog ,connect the Jp1 and Jp2 with the cutting-out cap . Jog/Momentary---- press one button is ON . loosen your finger on the same button is OFF .(need one channel switch  and one buttons remote control ) Self -lock/Toggle ----- press one button for one time is ON .press the same button again is OFF .need one channel switch and one buttons remote control  Inter-lock/Latched -------press one button is ON , press another button is OFF . (need one channel switch and 2 buttons remote control.

Please notice that . here is the 4CH receiver and 4 buttons transmitter, you just can choose the self-lock /Toggle or jog/Momentary or self-lock/Toggle and jog/Momentary together. Learning Method: Input DC12V Power for the receiver,press the learning button ,Green LED indicator OFF,Then press transmitter ,the LED indicator flash fast,It mean learning successfully. Clearing Code: Keeping press the learning button 8 seconds until the LED indicator ON, It mean the code have been cleared successfully.

Remote control (transmitter) Remote Control: Operating Voltage: DC12V Operating Current: 30MA Operating Frequency: 315MHZ /433MHz Frequency Distance: 20~200M(open place (please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-50% with the block and signal interference ).

Note: 433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency

Package included:      1*receiver (with cover)     1* transmitters(with battery)