+
OEM/ODM 10/100/1000Mbps 4 Ports PCBA Ethernet Switch PCB /Network Switch module poe switch ethernet switch
10/100/1000Mbps 4 Ports Ethernet Switch PCB /Network Switch module
This product is customized to meet customer requirements. It is a unmanaged commercial Ethernet switch, supports
4 Gigabit Ethernet RJ45 port, supports a DC 9 -18VDC power input, supports 2 DC output,all the way 5VDC (3A) DC output;
another way 3.8VDC (3A) output.
1. Indicators
| Indicator light | LED | Indicates status | Description of working status |
| Power Indicator | PWR (red) | On | Indicating that the power supply is normal; |
| Off | Indicates that the power supply has no power or is operating abnormally. | ||
| Each RJ45 port has two LED indicators, yellow for the port speed indicator, the green light for the port link status indicator | |||
| Ethernet interface connection indicator (1 ~ 5) | LINK/ACK (green) | On | It indicates that the physical port of the switch has a connection; |
| Flash | It indicates that the physical port of the switch has data activity. | ||
| Off | It indicates that the physical port of the switch has no connection. | ||
| Ethernet interface speed indicator (1 ~ 5) | 1000M/ 100M/ 10M (yellow) | On | 1000M working mode |
| Flash | 100M working mode | ||
| Off | 10M working mode | ||
2. Power Supply
| Items | Description | Note |
| Switch rated input voltage | 9~18VDC | / |
| Output Voltage 1 | 5VDC,3A |
|
| Output Voltage 2 | 3.8VDC,3A |
|
3. Working Environment
| Items | The range of requirements | Remarks |
| Working Temperature | -10℃~60℃ | / |
| Storage Temperature | -40℃~85℃ | / |
| Working Humidity | 5%~95% | No condensation |
Communication Interface
1) Gigabit Ethernet interface
Interface type: RJ45 port, with LED, support MDI / MDI-X adaptive.
Transmission distance: Unshielded twisted pair (UTP) or shielded twisted pair (STP), 1000Mbps
Connection with 120Ω super-5, Category 6 lines, transmission distance of up to 100m.
2) power interface
Interface type: PH type, 2-position 2.0mm pitch terminal block.
1)Supports IEEE802.3, 802.3u, 802.3ab and 802.3x standards
2)Supports four 10Base-T / 100Base-T (X) / 1000Base-T (X) Ethernet gigabit RJ45 ports
3)Support full / half duplex mode, MDI / MDI-X auto-detection
4)Supports full-wire-speed forwarding of non-blocking communications
5)Supports 9 ~ 18VDC power input
6)Support 5VDC power output, rated output current 3A
7)Support 3.8VDC power output, rated output current 3A
8)Supports fanless, low-power design
1) We can flash customer firmware, ODM customer baseboard or redesign whole board.
2) we can supply software design service.
3) All products have been double checked and packed in good condition before dispatching.
4) All products have 1 year warranty.
5) Provide OEM/ODM service.
1) How about the quality?
All our products manufactured with new brand materials,best design with strict old-aging testing and qc tested.
2) Do you provide OEM service?
Yes, we mainly provide OEM/ODM manufacturing.
3) Do you provide only PCBA?
Sure,PCBA is welcome here.
4) Is there MOQ limit?
Welcome to place sample order to check the quality before bulk orders.
5) Any qty welcome,but as you know,different qty with different price.
Large qty means low cost.
6) How about warranty?
All products provide 1 year warranty.
Brand Name : ANDDEAR
Package : Yes
Communication Mode : Full-Duplex & Half-Duplex
Switch Capacity : 3.2G
Switch Type : Ethernet
Transmission Rate : 10/100/1000Mbps
Function : LACP,Stackable
Model Number : ANDDEAR
