Description

Remote Control Music Butterfly LED Colorful Lighting DIY Kit Welding Skill Learning Suite DC 3.7V~5.5V

Introduction:

This kit contains 101 ultra-bright white LED (nominal brightness 2000-3000mcd), 7 blue LED and 8 red LED arranged to form a butterfly-shaped pattern and the MCU chip is controlled by a miniature infrared remote control to present multi-state colors The light pattern is shining even in the daytime and the effect is still very obvious which coupled with the 13 music performances (monophonic music) that can be easily controlled. It is very dynamic and interesting. It is definitely a very fashionable and attractive electronic work.

The assembly and production of this kit is relatively simple. The program has been written into the MCU chip and can be used after installation. It is a gift suitable for expressing love at Christmas, New Year's Day, Spring Festival, Valentine's Day and other festive and warm moments! It can also be installed at home as a lighting lamp and can be changed in various shapes and brightness by remote control.

Feature:

1>.116pcs highlight LED

2>.Perfect simple circuit

3>.Simple music effect

4>.13 music modes

5>.18 light flashing effects

Parameter:

1>.Product Name:Remote Control Music Butterfly Lighting DIY Kit

2>.Work Voltage:DC 3.7V~5.5V

3>.Work Current:500mA

4>.Work Temperature:-40℃~85℃

5>.Work Humidity:5%~85%RH

6>.Size(Installed):98*87*15mm

Remote Controller Instructions:

1>.Automatically play music randomly from built-in 13 kinds of music after power on.

2>.Automatic random flashing light effects from built-in 18 lighting effects after power on.

3>.Press ►|| button to switch play/pause and randomly switch randomly music and light effects.

4>.Press 0~9 and RPT to switch 11 kinds of music and light effects.

5>.Press Next and Prev to switch music and light effects.

6>.Press ON/OFF button to turn ON or OFF all music and LED(Blue LED keep on).

7>.Press Speaker button to turn ON/OFF music.Note: The light effects keep on.

8>.Press Mode button to switch display big butterfly and small butterfly.

9>.Press U/SD button to switch automatic display big/middle/small butterfly.

10>.Press EQ button to display small butterfly.

11>.Press VOL- button to automatically light up the butterfly lights gradually(7 change modes)

12>.Press VOL+ button to automatically turn OFF the butterfly lights gradually(7 change modes)

Installation Tips:

1>.User needs to prepare the welding tool at first.

2>.Please be patient until the installation is complete.

3>.The package is DIY kit.It need finish install by user.

4>.The soldering iron can't touch the components for a long time(1.0 second), otherwise it will damage the components.

5>.Pay attention to the positive and negative of the components.

6>.Strictly prohibit short circuit.

7>.User must install the LED according to the specified rules.Otherwise some LED will not light.

8>.Install complex components preferentially.

9>.Make sure all components are in right direction and right place.

10>.Check that all of the LED can be illuminated.

11>.It is strongly recommended to read the installation manual before starting installation!!!

12>.Please wear anti-static gloves or anti-static wristbands when installing electronic components.