Description:This is DC Motor + Stepper FeatherWing, which will let you use either a 2 x bipolar Stepper Motor or a 4 x brush DC Motor (or one Stepper Motor and two DC motors).

Features:4 full H Bridges: TB6612 chipsets provide 1.2a (peak 3A) per bridge with thermal turn-off protection and internal recoil protection diodes. Can run a 4.5VDC motor up to 13.5VDC.Up to 4 two-way dc motors with a separate 12-bit speed option (about 0.02% resolution)Up to 2 stepper motors (unipolar or bipolar), single coil, double coil, staggered or micro-stepping.The motor is automatically disabled when the power is turned onLarge 3.5mm terminal block connector for easy connection of wire (18-26awg) to power supplyPolarity protection 2-pin terminal block and jumper are connected to external power supply for separate logic/motor power supplyFully stackable design: 5 addresses to select jumper pads means up to 32 stackable wings: this is 64 stepper motors or 128 dc motors.

Specifications:Product size: about 50 * 25 * 8mm / 1.73 * 0.62 * 0.62"Net weight: about 9g

Note:Due to manual measurement, please allow 1-3mm difference.Because of different displays and different lighting, the image may not reflect the actual color of the project. Thank you for your understanding.