Waveshare 4.2Inch E-Ink Display Module, Rood Zwart Wit Drie-Kleur, Spi Interface, compatibel Met Raspberry Pi/Arduino/STM32
BESCHRIJVING
400x300, 4.2inch E-Ink Display Module, Drie-Kleur, Spi-interface
Dit is een E-Ink display module, 4.2inch, 400x300 resolutie, met embedded controller, communiceren via SPI interface, ondersteunt rood, zwart, en wit drie-kleur display.
Vanwege de voordelen zoals ultra laag stroomverbruik, brede kijkhoek, duidelijk display zonder elektriciteit, het is een ideale keuze voor toepassingen zoals plank label, industriële instrument, enzovoort.
Geen backlight, houdt weergave laatste inhoud voor een lange tijd zelfs wanneer power down
Ultra laag stroomverbruik, in principe power is alleen nodig voor verfrissende
Spi-interface, voor aansluiten met controller boards zoals Raspberry Pi/Nucleo, etc.
Onboard voltage vertaler, compatibel met 3.3V/5V Mcu 'S
Wordt geleverd met ontwikkeling middelen en handleiding (voorbeelden voor Raspberry Pi/Jetson Nano/STM32, etc.)
Bedrijfsspanning: 3.3V ~ 5V
Interface: 3-draads SPI, 4-wire SPI
Overzicht dimensie: 103.0mm × 78.5mm
Scherm afmetingen: 84.8mm × 63.6mm
Dot pitch: 0.212 × 0.212
Resolutie: 400 × 300
Display kleur: rood, zwart, wit
Grijs niveau: 2
Volledige refresh tijd: 15s
Refresh power: 26.4mW(typ.)
Standby vermogen: <0.017mW
Kijkhoek: >170 °
SYMBOOL |
BESCHRIJVING |
VCC |
3.3V ~ 5V |
GND |
Grond |
DIN |
SPI MOSI pin |
CLK |
SCK SPI pin |
CS |
SPI chip selectie, lage actieve |
DC |
Data/Command selectie (hoge voor data, laag voor commando) |
RST |
Externe reset, lage actieve |
DRUKKE |
Drukke status output, lage actieve |
Wiki:Www.waveshare.com/wiki/4.2inch_e-Paper_Module_ (B)
PAKKET INHOUD
Gewicht:0.054 kg
4.2inch e-Papier Module (B) x1
PH2.0 20cm 8Pin x1
Origin : Mainland China
Oorsprong : Cn (Oorsprong)
Merknaam : Waveshare
Display color : Red, Black, White
demo board type : Arm
Modelnummer : 4.2inch e-Paper Module (B)
Certificering : RoHS
Condition : New
Grey level : 2
Type : 1
Viewing angle : >170 degree
Resolution : 400x300
Operating voltage : 3.3V~5V
Refresh power : 26.4mW(typ.)
Standy power : <0.017mW