STM32F103C8T6 core board data:General arm routines in the link:http://pan.baidu.com/s/1bziMRGPassword: aekcThe core plate supporting materials:The Links:http://pan.baidu.com/s/1cGtYjWPassword: nr2h

On theSTM32F103C8T6Difference priority to the chipThe ARMThe Core board, has the following features:

1, on the boardMCUOne of the most basic circuit. 3.3 V power supply circuit, clock crystals circuit, reset circuit, the power indicator lightThe And so on.

2, the PCBZedoary processProcessing, maintaining the stability of the circuit operation.

3, which leads to the PC13 control user LED towns all the way to work for testing use.

4,withSWDThe simulation was debugging download interfaceThe interface need to minimum2The Thread can download was debugging task, can support STLINKV2, JLINK, ulink simulators are 2;

5,The mini - USB interface, can form a complete set of our mini USBTTL line to realize The power supply and serial communication, serial ports, download designed use;

6, compact dimension,Only the traditional 51 single chip microcomputerDIP40Encapsulation (um participant.STC89C52Very work size), especially in the lock on the useThe pin is fully compatible with 51 single - chip microcomputer and can be directly above 51 development board was debugging ARM program, greatly improve the efficiency of the use of 51 MCU development board.

7,Equipped with high quality1 * 40/2.54 mmThe spacing between The single row by row needle, to ensure that The conductive contact is good, easy to place The core plate to The standard of universal board or bread plate.The Row needles not welding by defaultThe user can choose "according to their own needs welding direction.

The chip 's brief The introduction:1, STM32F103C8T6

lThe kernel:ARM 32bitThe architecture™- M3 CPU

The highest -72 MHZThe Working frequency

- single cycle hardware multiplication and division

lThe memory

- the from64 k.The or128 k.Bytes of flash program memory

- as much as20 kBytes ofSRAM

lThe clock, reset and power management

-2.0~3.6V power supply andThe I/OThe pin

- access to electricity/Power reset(POR/PDR)The programmable voltage monitoring

device(PVD)

-4~16 MHZCrystal oscillator

The Set - up - embedded by the factory8 MHZtheRCoscillator

- embedded with calibration40 KHZtheRCoscillator

- produceThe CPUThe clock 'sPLL

- take the calibration function32 KHZ RTCoscillator

lLow power consumption

- sleep, stop and standby mode

-V BATThe forRTCAnd backup registers the power supply

l2a.12An AD converter,1 usConversion time(As many As16a.

- the scope of the transformation:0The to3.6 V

- the function of from and maintaining

- temperature sensor

lThe DMA:

-7The channelThe DMAThe controller

- support peripherals: the timer,The ADC,SPI,I 2 CThe and

USART

lAs many As80A fastThe I/OThe port

-26/37/51/80a.The I/OAll expressions using,The I/OThe expressions using to The image

16An external interrupt;Almost all of the port can be tolerated5 vThe letter

No.

lThe Debug mode

- serial single was debugging(SWD)The andJTAGinterface

lAs many As7A timer

-3a.16A timer, each timer is up to4The for

The input capture/The output is/ PWMThe Or channel pulse counting

And incremental encoder input

-1a.16With dead zone control and emergency brake for the motor

The control of ThePWMThe Advanced control timer

-2A watchdog timer(Independent and window type)

- the system time timer:24Since the reduction type of counter

lAs many As9A communication interface

- as many as2a.I 2 Cinterface(The supportSMBus/PMBus)

- as many as3a.USARTinterface(The supportISO7816Interface,

LIN,,IrDAInterface and modem control)

As many As2a.SPIinterface(18 mThe position/seconds)

-CANinterface(2.0 BTake the initiative to)

-USB 2.0Interface at full speed

lCRCThe cell,96The only code chip

Was Debugging download: download the support SWD interface was Debugging, support serial download the program.

2, the AMS1117-3.3:3.3 V voltage chip, the maximum output of 300 ma.

Interface description:1, SWD interface: support simulation, downloading and was debugging.

2, the MCU pin interface: lead to I/O pins, 2.54 mm spacing, work connection with peripherals.

3, 5 v power supply input/output interface:, 2 in external power supply, or to deal with other modulesOther device the introduction:

1, the power leds (PWRS) : the supply status, can determine been the power supply is stable.

2, start, jump risk selection programmatically (1, user flash 2, 3), the system memory SRAM.

: 3, pressing the reset button for the user reset chip program.

4, 8 m crystals: set up through the frequency doubling the system frequency is 72 MHZ.

The Product pictures:

Shipping list:

Motherboard X1 (anti -static bag packaging, with row needles don 't welding)