Parameter:
Temperature range: -20 -60℃
Humidity range: 00% -100%RH
Control accuracy: 0.1 Celsius, 0.1%RH
Detection probe: integrated sensor
Output type: relay output
Output capacity: maximum 10A
Dimension: 57*60*20mm
Function:
Temperature function:
1. Automatic recognition of working mode
2. Cooling
3. Heating
4. Temperature correction function
Humidity function:
1. Automatic recognition of working mode
2. Dehumidifying
3. Humidifying
4. Humidity correction function
Remotely reading/setting of parameters
Real-time reporting of temperature/humidity
Relay enable function (enabled by default)
Usage:
Step 1: Connect sensor to controller
Step 2: Connect to power supply to controller
Step 3: Adjust Start Temperature,Stop temperature and Temperature Correction
Step 4: Adjust Start Humidity,Stop Humidity and Humidity Correction
Step 5: Enable relay output according requirement;
Step 6: Remove power supply
Step 7: Connect to load with power supply at relay output terminal if need at Step5
Step 8: Connect to power supply for controller again
Step 9: Test and working
Set Parameter:
1. Working Mode:
The system automatically recognizes the working mode according to the starting/stopping temperature and the starting/stopping humidity.
2. How to set the starting/stopping temperature function?
Hold press the "TM+"/ "TM-" button for more than 3 seconds to enter the startup/stop temperature setting interface. The parameters can be changed by the "TM+" and "TM-" buttons. After the parameters are changed, wait for 6s and it will automatically save and exit.
3. How to set the starting/stopping humidity function?
Hold press the "RH+"/"RH-" button for more than 3 seconds to set the minimum/maximum value of humidity. The parameters can be changed by "RH+" and "RH-" buttons. After the parameters are changed, wait for 6s and it will automatically save and exit.
Package Included:
1 * Humidity and Temperature Controller with SHT20 Sensor Probe