+

12V DC MP3 Decoder Board WAV Lossless Decoding Board tf Card usb Decoder Ultra APE board (C3B2)

USD 2.48

12V DC MP3 Decoder Board WAV Lossless Decoding Board tf Card usb Decoder Ultra APE board (C3B2)

Description
The usb interface can not directly direct high-power equipment such as mobile phones, MP3, MP4 and other external storage devices to prevent damage to the decoder board!
Baby can not directly pick up the speaker, you need to pick up the amplifier can drive the speaker ~ pro who must be optimistic about the page before the introduction!
The main function:
1. Support WAV lossless music player, support 320Kbps bit rate high quality MP3 music.
2. Increase the TF card slot, you can directly plug the phone memory card (TF card) to use. Plug TF memory card, the public to the public usb cable connection with the computer, according to the remote control moed mode switch can be used as a card reader, direct copy of the audio file to the TF card, very convenient.
3. MINI-type small board design, 6-12V power supply, use a wider range of car CD transformation, speakers before the source sound decoding, lossless CD player replacement.
4. Support usb sound card function.
5. Loop mode: sequential loop, random cycle, single cycle, single pause The

Features

  1 the smallest market, Powerful, inexpensive mini-lossless WAV + MP3 audio decoder board, dual decode board.
[2] Almighty remote control, 3-8 meters long distance remote control, music and heart.
3 power to support the track memory playback.
[4] 8-320Kbps wide MP3 rate range, enjoy the original sense of hearing, 320Kbps and then up is lossless music APE Formatted.
[5] support 8-48000Hz sampling frequency WAV format music files (commonly used 44KHz and 48KHz), like CD high quality music you do not miss. Does not support DTS surround multi-channel WAV format.
6Increase TF card slot, you can directly plug the phone memory card (TF card) to use. Plug TF memory card, the public to the public usb cable connection with the computer can be used when the card reader, direct copy of the audio file to the TF card, very convenient.
7 support TF card, U disk or USB card reader to play music.
8 6-12V wide voltage range of work, more suitable for cars, motorcycles, audio modification.
[9] The overall circuit wiring beautiful and reasonable, to avoid the noise caused by self-interference, high signal to noise ratio.
10 with LED blue work indicator, next to the external two holes can be connected in parallel welding blue in-line LED indicator.
[11] Are you still looking for APE player? In fact, APE is compressed from the WAV, the sound quality exactly the same, the difference is that WAV has not been compressed, the file space occupied by APE only large, now large capacity U disk capacity is not a problem, APE price is too high, listen to WAV format Of the lossless music, it is a kind of authentic enjoyment.

Shipping list:

[1] MINI decoders - 1 block;
[2] all-round remote control - 1; due to air may not have a battery]
3 3P audio output line - 1 root;
4 2P power input line - 1 root.
  The main parameters:
1 working voltage: 6-12V; Decoder board marked above 9V is recommended the best voltage
2 working current: 200-900mA; high current using the series in parallel 4.7 ohm current limiting
[3] support format: 8-320K rate MP3 format, 8-48000Hz sampling frequency WAV format,Does not support DTS decoding above 3 channels The WAV test;
4 operating mode: power on the direct play, full remote control operation;
5 device type: TF card, U disk or loading SD card, TF card USB card reader, Note: a small part of the cottage U disk due to chip problems may be incompatible situation, recommend the use of genuine U disk.
6 PCB material: FR-4 super-hardness double-sided tin plate;
7PCB size: 48x28mm, thickness: 1MM.
[8] a set of net weight: 23g
[9] This product is absolutely good value for money, demanding a very high degree of customers, it is recommended to buy a professional player. OUR does not provide technical guidance, such as do not understand the use and modification of the customer, the proposed Shen shot, thank you!

Remote control - part of the key function description:

Previous Short press - select the track, long press - rewind.
Next Short press - select the next track, long press - fast forward.
VOL + / VOL- volume size control key.
[RPT] Playback mode. There are four loop modes: sequential loop, random loop, single loop, single pause. Boot the default "sequential loop", the first short press the remote control REP key to achieve "random cycle", the second short press to achieve "single cycle", the third short press to achieve "single play after the end of" The fourth short press returns to the "sequential loop".
Digital selection key 0-9 digit selection keys, select two or more tracks to be input continuously, after about 2-3 seconds to switch to the selected track, U disk storage tracks more direct digital can quickly select tracks The
EQ sound mode, click to switch to the standard, subwoofer, classical, soft and other sound mode, only supports MP3 format.
 
The best working voltage of the board is 6-9V. If you are using 12V power supply for car modification, it is recommended to connect a resistor (0.5-1W2.2-4.7 ohms) and a diode (1N4007, RL207, etc.) in series with the following principle , To ensure that the board can be long-term stable work.
 
Specification

Brand Name : KAI TUO DA

Supply Voltage : Datasheet

Type : Other

is_customized : Yes

Model Number : Title & photo

Dissipation Power : Datasheet

Operating Temperature : Datasheet

Origin : Mainland China

Application : Other

Condition : New

model : 007955

+