Description

Light Curable Composite Resin Dental Filing Material (General for front and rear teeth)

This product is a high vacuum mixing into a single component paste agent, the main organic component is multifunctional methacrylate, accounting for 38% of the volume, inorganic filler particle size of 1nm ~10pm, accounting for 62% of the volume, without mixing, wear-resistant, safe to human body.lt is a high degree of polymerization material with halogen light curing.Specifications: Net weight 4.0g, available in 4 colors (including: A1, A2, A3, A3.5,B1) for clinical selection, is the material for clinical repair of class 1-5 dental cavities.

According to YY1042-2011 standard classification: this product belongs to the II type of the group 1, that is, not suitable for octaval surface repair, halogen light curing, completed in the oral resin based repair materials class.

CAUTIONS

a. Must not use phenols, clove oil, zinc oxide as the first layer of the bottom material, because clove oil contains polymer inhibitor "phenol", and directly affect the degree of polymerization of composite resin.

b. Acid treatment to do a good job of lips, teeth and adjacent teeth isolation protection, should avoid contact with the eyes, mucous membranes and skin.

c. During curing operation, the distance between the lamp surface and the composite material should be kept below 2mm, but not in contact with the material. Curing time is shown in the table.

d. Before filling with adhesive and composite resin, the tooth body should deal with the surface pollution of water and other impurities.

1. the use of the environment: the product should be operated at room temperature 23*C±2°C environmental conditions.

2. Storage conditions: The product should be stored in a cool and dry place between 10°C and 25°C, and avoid direct light exposure.

3. shelf life: this product is valid for three years, do not use expired products.